日本SMC小型空氣用壓力傳感器，熱賣SMC壓力傳感器 Operation guideline: Design data Relation between Nozzle Diameter and Detection Distance The data in the following charts are characteristics of hysteresis at the detection distance. In case accuracy is required by the settings, the design should be made so that the hysteresis will stay within the optimum adjustment range not larger than When you design the pneumatic circuit using the air catch sensor, please refer to the data below. The detection distance of the air catch sensor is between 10 and 300 μm. However, please note that stable detection cannot be done when supply pressure or  nozzle size are different.